paint·day

Is it good to coat in Mobile, AL this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Mobile, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Wed (Good to go)
TueRISK
63°/52°
Dew margin
4.7°F
Overnight dew
High
Rain
3%
Window
—

High condensation risk overnight — surface dips to within 4.7°F of the 46°F dew point (low 49°F, 3% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedGO
70°/55°
Dew margin
6.5°F
Overnight dew
Low
Rain
12%
Window
8am–5pm

Clear to coat: temps 55–70°F, RH under 71%, surface stays 6.5°F+ above the dew point, no rain in the cure window.

ThuCAUTION
71°/64°
Dew margin
3.6°F
Overnight dew
Watch
Rain
16%
Window
8am–11am

Watch overnight dew — surface comes within 3.6°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

FriRISK
68°/64°
Dew margin
0.7°F
Overnight dew
High
Rain
19%
Window
—

High condensation risk overnight — surface dips to within 0.7°F of the 63°F dew point (low 63°F, 100% cloud, 8 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatRISK
65°/65°
Dew margin
0.8°F
Overnight dew
High
Rain
4%
Window
—

High condensation risk overnight — surface dips to within 0.8°F of the 63°F dew point (low 64°F, 100% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SunRISK
70°/65°
Dew margin
0.8°F
Overnight dew
High
Rain
3%
Window
—

High condensation risk overnight — surface dips to within 0.8°F of the 58°F dew point (low 58°F, 52% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

MonCAUTION
76°/64°
Dew margin
4.8°F
Overnight dew
Watch
Rain
2%
Window
8am–7pm

Watch overnight dew — surface comes within 4.8°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

Hold offTue — today & tonight
  • High condensation risk overnight — surface dips to within 4.7°F of the 46°F dew point (low 49°F, 3% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Mobile

Epoxy & Resin Floors weather elsewhere in Alabama