paint·day

Is it good to coat in Indianapolis, IN this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Indianapolis, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Mon (Caution)
TueRISK
56°/31°
Dew margin
-1.8°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -1.8°F of the 37°F dew point (low 30°F, 100% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedRISK
61°/34°
Dew margin
1.3°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within 1.3°F of the 32°F dew point (low 32°F, 100% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

ThuRISK
63°/44°
Dew margin
-3.6°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -3.6°F of the 38°F dew point (low 34°F, 0% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

FriRISK
65°/48°
Dew margin
-2°F
Overnight dew
High
Rain
2%
Window
—

High condensation risk overnight — surface dips to within -2°F of the 36°F dew point (low 34°F, 100% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatRISK
65°/49°
Dew margin
0.2°F
Overnight dew
High
Rain
29%
Window
—

High condensation risk overnight — surface dips to within 0.2°F of the 56°F dew point (low 54°F, 100% cloud, 9 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SunRISK
59°/56°
Dew margin
-1.9°F
Overnight dew
High
Rain
30%
Window
—

High condensation risk overnight — surface dips to within -1.9°F of the 32°F dew point (low 30°F, 3% cloud, 6 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

MonCAUTION
52°/42°
Dew margin
6.3°F
Overnight dew
Low
Rain
1%
Window
2pm–5pm

Cold mornings (down to 42°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

Hold offTue — today & tonight
  • High condensation risk overnight — surface dips to within -1.8°F of the 37°F dew point (low 30°F, 100% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
  • Cold mornings (down to 31°F, floor is 50°F) — wait for the surface to warm past midday before you coat.
  • High humidity (95%, over the 85% mark) slows drying — keep an eye on the cure window.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Indianapolis

Epoxy & Resin Floors weather elsewhere in Indiana