paint·day

Is it good to coat in Jackson, MS this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Jackson, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayGood to goBest upcoming window: Mon (Good to go)
MonGO
67°/52°
Dew margin
6°F
Overnight dew
Low
Rain
0%
Window
8am–5pm

Clear to coat: temps 52–67°F, RH under 56%, surface stays 6°F+ above the dew point, no rain in the cure window.

TueCAUTION
65°/49°
Dew margin
10.9°F
Overnight dew
Low
Rain
0%
Window
9am–5pm

Cold mornings (down to 49°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

WedGO
73°/55°
Dew margin
9°F
Overnight dew
Low
Rain
2%
Window
8am–5pm

Clear to coat: temps 55–73°F, RH under 50%, surface stays 9°F+ above the dew point, no rain in the cure window.

ThuCAUTION
73°/60°
Dew margin
3.6°F
Overnight dew
Watch
Rain
3%
Window
8am–5pm

Watch overnight dew — surface comes within 3.6°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

FriRISK
62°/61°
Dew margin
1°F
Overnight dew
High
Rain
4%
Window
—

High condensation risk overnight — surface dips to within 1°F of the 61°F dew point (low 61°F, 100% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatRISK
66°/63°
Dew margin
-3.7°F
Overnight dew
High
Rain
6%
Window
—

High condensation risk overnight — surface dips to within -3.7°F of the 62°F dew point (low 58°F, 100% cloud, 1 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SunRISK
71°/65°
Dew margin
-3.8°F
Overnight dew
High
Rain
6%
Window
—

High condensation risk overnight — surface dips to within -3.8°F of the 57°F dew point (low 53°F, 100% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

Good to goMon — today & tonight
  • Clear to coat: temps 52–67°F, RH under 56%, surface stays 6°F+ above the dew point, no rain in the cure window.

Good to go. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Jackson

Epoxy & Resin Floors weather elsewhere in Mississippi