paint·day

Is it good to coat in Winston-Salem, NC this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Winston-Salem, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold off
MonRISK
58°/34°
Dew margin
-4.1°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -4.1°F of the 28°F dew point (low 23°F, 5% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

TueRISK
60°/34°
Dew margin
-0.4°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -0.4°F of the 24°F dew point (low 23°F, 0% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedRISK
64°/37°
Dew margin
-5.3°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -5.3°F of the 28°F dew point (low 23°F, 0% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

ThuRISK
65°/47°
Dew margin
-14.6°F
Overnight dew
High
Rain
1%
Window
—

High condensation risk overnight — surface dips to within -14.6°F of the 41°F dew point (low 26°F, 70% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

FriRISK
68°/51°
Dew margin
-10.3°F
Overnight dew
High
Rain
5%
Window
—

High condensation risk overnight — surface dips to within -10.3°F of the 45°F dew point (low 35°F, 100% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatRISK
65°/50°
Dew margin
0.9°F
Overnight dew
High
Rain
29%
Window
—

High condensation risk overnight — surface dips to within 0.9°F of the 50°F dew point (low 51°F, 100% cloud, 7 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SunRISK
55°/53°
Dew margin
-7°F
Overnight dew
High
Rain
16%
Window
—

High condensation risk overnight — surface dips to within -7°F of the 54°F dew point (low 47°F, 100% cloud, 6 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

Hold offMon — today & tonight
  • High condensation risk overnight — surface dips to within -4.1°F of the 28°F dew point (low 23°F, 5% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
  • Cold mornings (down to 34°F, floor is 50°F) — wait for the surface to warm past midday before you coat.
  • High humidity (87%, over the 85% mark) slows drying — keep an eye on the cure window.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Winston-Salem

Epoxy & Resin Floors weather elsewhere in North Carolina