paint·day

Is it good to coat in Nashua, NH this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Nashua, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold off
SunRISK
47°/36°
Dew margin
2.9°F
Overnight dew
Watch
Rain
2%
Window
—

Too cold to coat — daytime high only 47°F, below the 50°F minimum (even a low-temp line needs 50°F+).

MonRISK
49°/35°
Dew margin
0.4°F
Overnight dew
High
Rain
1%
Window
—

High condensation risk overnight — surface dips to within 0.4°F of the 28°F dew point (low 28°F, 3% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

TueRISK
54°/35°
Dew margin
-0.3°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -0.3°F of the 33°F dew point (low 32°F, 45% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedRISK
59°/43°
Dew margin
-5°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -5°F of the 34°F dew point (low 29°F, 10% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

ThuRISK
60°/45°
Dew margin
-4.2°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -4.2°F of the 33°F dew point (low 29°F, 100% cloud, 7 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

FriRISK
62°/51°
Dew margin
-6.4°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -6.4°F of the 40°F dew point (low 33°F, 0% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatRISK
57°/44°
Dew margin
0.8°F
Overnight dew
High
Rain
2%
Window
—

High condensation risk overnight — surface dips to within 0.8°F of the 42°F dew point (low 43°F, 100% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

Hold offSun — today & tonight
  • Too cold to coat — daytime high only 47°F, below the 50°F minimum (even a low-temp line needs 50°F+).
  • Watch overnight dew — surface comes within 2.9°F of the dew point (margin is 5°F). Time the coat to dry well before evening.
  • High humidity (86%, over the 85% mark) slows drying — keep an eye on the cure window.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Nashua

Epoxy & Resin Floors weather elsewhere in New Hampshire