paint·day

Is it good to coat in Bend, OR this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Bend, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold off
MonRISK
46°/31°
Dew margin
-4.4°F
Overnight dew
High
Rain
32%
Window
—

High condensation risk overnight — surface dips to within -4.4°F of the 32°F dew point (low 24°F, 98% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

TueRISK
44°/32°
Dew margin
1.6°F
Overnight dew
High
Rain
32%
Window
—

High condensation risk overnight — surface dips to within 1.6°F of the 29°F dew point (low 28°F, 100% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedRISK
44°/35°
Dew margin
-7.2°F
Overnight dew
High
Rain
39%
Window
—

High condensation risk overnight — surface dips to within -7.2°F of the 30°F dew point (low 22°F, 100% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

ThuRISK
33°/31°
Dew margin
-6.8°F
Overnight dew
High
Rain
8%
Window
—

High condensation risk overnight — surface dips to within -6.8°F of the 30°F dew point (low 23°F, 100% cloud, 7 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

FriRISK
42°/29°
Dew margin
3.7°F
Overnight dew
High
Rain
22%
Window
—

High condensation risk overnight — surface dips to within 3.7°F of the 25°F dew point (low 27°F, 7% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatRISK
43°/29°
Dew margin
3.3°F
Overnight dew
High
Rain
29%
Window
—

High condensation risk overnight — surface dips to within 3.3°F of the 24°F dew point (low 26°F, 36% cloud, 7 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SunRISK
45°/30°
Dew margin
2°F
Overnight dew
High
Rain
16%
Window
—

High condensation risk overnight — surface dips to within 2°F of the 27°F dew point (low 28°F, 95% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

Hold offMon — today & tonight
  • High condensation risk overnight — surface dips to within -4.4°F of the 32°F dew point (low 24°F, 98% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
  • Too cold to coat — daytime high only 46°F, below the 50°F minimum (even a low-temp line needs 50°F+).
  • Some rain risk (32%) during the cure window — re-check the radar before you start.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Bend

Epoxy & Resin Floors weather elsewhere in Oregon