paint·day

Is it good to coat in Clarksville, TN this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Clarksville, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold off
TueRISK
63°/37°
Dew margin
-1.1°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -1.1°F of the 27°F dew point (low 25°F, 1% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedRISK
66°/38°
Dew margin
-4.7°F
Overnight dew
High
Rain
3%
Window
—

High condensation risk overnight — surface dips to within -4.7°F of the 33°F dew point (low 27°F, 5% cloud, 6 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

ThuRISK
68°/50°
Dew margin
-6.1°F
Overnight dew
High
Rain
3%
Window
—

High condensation risk overnight — surface dips to within -6.1°F of the 37°F dew point (low 31°F, 80% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

FriRISK
69°/54°
Dew margin
-5.5°F
Overnight dew
High
Rain
6%
Window
—

High condensation risk overnight — surface dips to within -5.5°F of the 47°F dew point (low 41°F, 100% cloud, 6 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatRISK
68°/58°
Dew margin
1.1°F
Overnight dew
High
Rain
15%
Window
—

High condensation risk overnight — surface dips to within 1.1°F of the 56°F dew point (low 57°F, 100% cloud, 6 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SunRISK
63°/54°
Dew margin
-9.9°F
Overnight dew
High
Rain
15%
Window
—

High condensation risk overnight — surface dips to within -9.9°F of the 37°F dew point (low 27°F, 0% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

MonRISK
57°/45°
Dew margin
-1.7°F
Overnight dew
High
Rain
1%
Window
—

High condensation risk overnight — surface dips to within -1.7°F of the 35°F dew point (low 33°F, 98% cloud, 7 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

Hold offTue — today & tonight
  • High condensation risk overnight — surface dips to within -1.1°F of the 27°F dew point (low 25°F, 1% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
  • Cold mornings (down to 37°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Clarksville

Epoxy & Resin Floors weather elsewhere in Tennessee