Is it good to coat in Huntington, WV this week?
A live 7-day go/no-go calendar for epoxy & resin floors in Huntington, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.
- Dew margin
- -6.8°F
- Overnight dew
- High
- Rain
- 0%
- Window
- —
High condensation risk overnight — surface dips to within -6.8°F of the 50°F dew point (low 43°F, 0% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
- Dew margin
- -10.1°F
- Overnight dew
- High
- Rain
- 0%
- Window
- —
High condensation risk overnight — surface dips to within -10.1°F of the 54°F dew point (low 44°F, 4% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
- Dew margin
- -1.8°F
- Overnight dew
- High
- Rain
- 0%
- Window
- —
High condensation risk overnight — surface dips to within -1.8°F of the 52°F dew point (low 49°F, 82% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
- Dew margin
- 2.9°F
- Overnight dew
- High
- Rain
- 6%
- Window
- —
High condensation risk overnight — surface dips to within 2.9°F of the 60°F dew point (low 63°F, 0% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
- Dew margin
- -9.4°F
- Overnight dew
- High
- Rain
- 43%
- Window
- —
High condensation risk overnight — surface dips to within -9.4°F of the 67°F dew point (low 55°F, 100% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
- Dew margin
- -7.7°F
- Overnight dew
- High
- Rain
- 56%
- Window
- —
High condensation risk overnight — surface dips to within -7.7°F of the 67°F dew point (low 59°F, 100% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
- Dew margin
- -3.5°F
- Overnight dew
- High
- Rain
- 52%
- Window
- —
High condensation risk overnight — surface dips to within -3.5°F of the 67°F dew point (low 59°F, 91% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
- High condensation risk overnight — surface dips to within -6.8°F of the 50°F dew point (low 43°F, 0% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.
Why these thresholds
Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.
- • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
- • Air + surface in the 50–86°F band (low-temp lines to 50°F).
- • Humidity under 85%; ideally under 80%.
- • No rain for 24h after application.
- • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.
Free in the beta
Watch this job site 24/7
Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.