Is it good to stain in Fayetteville, AR this week?
A live 7-day go/no-go calendar for deck & fence stain in Fayetteville, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.
- Dew margin
- 7.9°F
- Overnight dew
- Low
- Rain
- 2%
- Window
- 8am–5pm
Clear to stain: temps 65–81°F, RH under 76%, surface stays 7.9°F+ above the dew point, no rain in the cure window.
- Dew margin
- 6.9°F
- Overnight dew
- Low
- Rain
- 2%
- Window
- 8am–5pm
Clear to stain: temps 68–88°F, RH under 39%, surface stays 6.9°F+ above the dew point, no rain in the cure window.
- Dew margin
- 2.6°F
- Overnight dew
- Watch
- Rain
- 41%
- Window
- —
Rain likely in the 24h cure window (41% chance, ~1.2mm) — it can wash out or mar an uncured stain.
- Dew margin
- -2.9°F
- Overnight dew
- High
- Rain
- 70%
- Window
- —
High condensation risk overnight — surface dips to within -2.9°F of the 62°F dew point (low 60°F, 100% cloud, 1 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.
- Dew margin
- -13.5°F
- Overnight dew
- High
- Rain
- 50%
- Window
- —
High condensation risk overnight — surface dips to within -13.5°F of the 65°F dew point (low 51°F, 100% cloud, 3 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.
- Dew margin
- -19.9°F
- Overnight dew
- High
- Rain
- 43%
- Window
- —
High condensation risk overnight — surface dips to within -19.9°F of the 65°F dew point (low 45°F, 100% cloud, 4 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.
- Dew margin
- -3.4°F
- Overnight dew
- High
- Rain
- 19%
- Window
- —
High condensation risk overnight — surface dips to within -3.4°F of the 58°F dew point (low 54°F, 100% cloud, 4 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.
- Clear to stain: temps 65–81°F, RH under 76%, surface stays 7.9°F+ above the dew point, no rain in the cure window.
Good to go. These are forecast numbers — confirm the surface temperature on-site before you start.
Why these thresholds
Stain applied to a damp or dew-wet board can't penetrate — it beads, stays tacky and flakes. Wood must be dry and stay above the dew point while it sets.
- • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
- • Air + surface in the 50–90°F band (low-temp lines to 45°F).
- • Humidity under 85%; ideally under 70%.
- • No rain for 24h after application.
- • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.
Free in the beta
Watch this job site 24/7
Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.