paint·day

Is it good to stain in Santa Ana, CA this week?

A live 7-day go/no-go calendar for deck & fence stain in Santa Ana, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Tue (Good to go)
MonRISK
74°/65°
Dew margin
4.8°F
Overnight dew
Watch
Rain
22%
Window
—

Rain likely in the 24h cure window (22% chance, ~1.1mm) — it can wash out or mar an uncured stain.

TueGO
69°/55°
Dew margin
10.5°F
Overnight dew
Low
Rain
0%
Window
8am–5pm

Clear to stain: temps 55–69°F, RH under 66%, surface stays 10.5°F+ above the dew point, no rain in the cure window.

WedRISK
67°/59°
Dew margin
4.2°F
Overnight dew
Watch
Rain
80%
Window
—

Rain likely in the 24h cure window (80% chance) — it can wash out or mar an uncured stain.

ThuRISK
64°/61°
Dew margin
3.2°F
Overnight dew
High
Rain
91%
Window
—

High condensation risk overnight — surface dips to within 3.2°F of the 43°F dew point (low 46°F, 0% cloud, 4 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

FriRISK
67°/60°
Dew margin
-1.8°F
Overnight dew
High
Rain
7%
Window
—

High condensation risk overnight — surface dips to within -1.8°F of the 43°F dew point (low 41°F, 0% cloud, 4 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

SatRISK
67°/60°
Dew margin
-2.8°F
Overnight dew
High
Rain
12%
Window
—

High condensation risk overnight — surface dips to within -2.8°F of the 47°F dew point (low 44°F, 100% cloud, 2 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

SunRISK
64°/63°
Dew margin
-0.5°F
Overnight dew
High
Rain
19%
Window
—

High condensation risk overnight — surface dips to within -0.5°F of the 52°F dew point (low 51°F, 100% cloud, 8 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

Hold offMon — today & tonight
  • Rain likely in the 24h cure window (22% chance, ~1.1mm) — it can wash out or mar an uncured stain.
  • Watch overnight dew — surface comes within 4.8°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Stain applied to a damp or dew-wet board can't penetrate — it beads, stays tacky and flakes. Wood must be dry and stay above the dew point while it sets.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–90°F band (low-temp lines to 45°F).
  • • Humidity under 85%; ideally under 70%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Santa Ana

Deck & Fence Stain weather elsewhere in California