paint·day

Is it good to coat in Tallahassee, FL this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Tallahassee, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Sun (Caution)
TueRISK
57°/52°
Dew margin
-0.1°F
Overnight dew
High
Rain
24%
Window
—

High condensation risk overnight — surface dips to within -0.1°F of the 53°F dew point (low 53°F, 100% cloud, 12 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedRISK
70°/54°
Dew margin
0.7°F
Overnight dew
High
Rain
40%
Window
—

High condensation risk overnight — surface dips to within 0.7°F of the 61°F dew point (low 62°F, 100% cloud, 11 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

ThuRISK
65°/62°
Dew margin
1.5°F
Overnight dew
High
Rain
21%
Window
—

High condensation risk overnight — surface dips to within 1.5°F of the 63°F dew point (low 62°F, 100% cloud, 11 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

FriRISK
70°/64°
Dew margin
1.4°F
Overnight dew
High
Rain
42%
Window
—

High condensation risk overnight — surface dips to within 1.4°F of the 62°F dew point (low 63°F, 100% cloud, 6 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatRISK
71°/64°
Dew margin
0.2°F
Overnight dew
High
Rain
17%
Window
—

High condensation risk overnight — surface dips to within 0.2°F of the 61°F dew point (low 62°F, 17% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SunCAUTION
74°/65°
Dew margin
3°F
Overnight dew
Watch
Rain
3%
Window
9am–4pm

Watch overnight dew — surface comes within 3°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

MonRISK
74°/62°
Dew margin
-2.1°F
Overnight dew
High
Rain
5%
Window
—

High condensation risk overnight — surface dips to within -2.1°F of the 59°F dew point (low 57°F, 100% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

Hold offTue — today & tonight
  • High condensation risk overnight — surface dips to within -0.1°F of the 53°F dew point (low 53°F, 100% cloud, 12 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
  • Rain likely in the 24h cure window (24% chance, ~3.6mm) — it can wash out or mar an uncured coat.
  • High humidity (93%, over the 85% mark) slows drying — keep an eye on the cure window.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Tallahassee

Epoxy & Resin Floors weather elsewhere in Florida