paint·day

Is it good to coat in Baton Rouge, LA this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Baton Rouge, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Wed (Good to go)
TueRISK
65°/48°
Dew margin
2.5°F
Overnight dew
High
Rain
1%
Window
—

High condensation risk overnight — surface dips to within 2.5°F of the 49°F dew point (low 52°F, 7% cloud, 7 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedGO
74°/56°
Dew margin
5.1°F
Overnight dew
Low
Rain
3%
Window
8am–5pm

Clear to coat: temps 56–74°F, RH under 82%, surface stays 5.1°F+ above the dew point, no rain in the cure window.

ThuCAUTION
77°/61°
Dew margin
2.5°F
Overnight dew
Watch
Rain
7%
Window
8am–7pm

Watch overnight dew — surface comes within 2.5°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

FriRISK
68°/63°
Dew margin
0.2°F
Overnight dew
High
Rain
5%
Window
—

High condensation risk overnight — surface dips to within 0.2°F of the 62°F dew point (low 62°F, 100% cloud, 6 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatRISK
72°/65°
Dew margin
-1.1°F
Overnight dew
High
Rain
2%
Window
—

High condensation risk overnight — surface dips to within -1.1°F of the 63°F dew point (low 62°F, 100% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SunGO
81°/68°
Dew margin
6°F
Overnight dew
Low
Rain
4%
Window
8am–5pm

Clear to coat: temps 68–81°F, RH under 75%, surface stays 6°F+ above the dew point, no rain in the cure window.

MonGO
78°/68°
Dew margin
7.9°F
Overnight dew
Low
Rain
2%
Window
8am–5pm

Clear to coat: temps 68–78°F, RH under 71%, surface stays 7.9°F+ above the dew point, no rain in the cure window.

Hold offTue — today & tonight
  • High condensation risk overnight — surface dips to within 2.5°F of the 49°F dew point (low 52°F, 7% cloud, 7 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
  • Cold mornings (down to 48°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Baton Rouge

Epoxy & Resin Floors weather elsewhere in Louisiana