paint·day

Is it good to coat in Scranton, PA this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Scranton, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Sat (Caution)
SunRISK
43°/39°
Dew margin
2.1°F
Overnight dew
Watch
Rain
8%
Window
—

Too cold to coat — daytime high only 43°F, below the 50°F minimum (even a low-temp line needs 50°F+).

MonRISK
43°/40°
Dew margin
-1.6°F
Overnight dew
High
Rain
1%
Window
—

High condensation risk overnight — surface dips to within -1.6°F of the 35°F dew point (low 33°F, 100% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

TueRISK
53°/37°
Dew margin
-4.6°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -4.6°F of the 35°F dew point (low 30°F, 28% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedRISK
55°/39°
Dew margin
-4°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -4°F of the 34°F dew point (low 30°F, 12% cloud, 1 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

ThuRISK
58°/41°
Dew margin
-2.7°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -2.7°F of the 34°F dew point (low 31°F, 5% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

FriRISK
58°/43°
Dew margin
-5.5°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -5.5°F of the 39°F dew point (low 33°F, 100% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatCAUTION
60°/46°
Dew margin
3.5°F
Overnight dew
Watch
Rain
0%
Window
10am–4pm

Watch overnight dew — surface comes within 3.5°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

Hold offSun — today & tonight
  • Too cold to coat — daytime high only 43°F, below the 50°F minimum (even a low-temp line needs 50°F+).
  • Watch overnight dew — surface comes within 2.1°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Scranton

Epoxy & Resin Floors weather elsewhere in Pennsylvania