paint·day

Is it good to coat in Myrtle Beach, SC this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Myrtle Beach, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayCautionBest upcoming window: Mon (Caution)
MonCAUTION
58°/42°
Dew margin
6.4°F
Overnight dew
Low
Rain
0%
Window
10am–5pm

Cold mornings (down to 42°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

TueCAUTION
61°/45°
Dew margin
4.3°F
Overnight dew
Watch
Rain
0%
Window
10am–5pm

Watch overnight dew — surface comes within 4.3°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

WedCAUTION
67°/49°
Dew margin
3.2°F
Overnight dew
Watch
Rain
0%
Window
9am–5pm

Watch overnight dew — surface comes within 3.2°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

ThuCAUTION
70°/55°
Dew margin
2.4°F
Overnight dew
Watch
Rain
11%
Window
8am–6pm

Watch overnight dew — surface comes within 2.4°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

FriCAUTION
70°/61°
Dew margin
3°F
Overnight dew
Watch
Rain
17%
Window
8am–4pm

Watch overnight dew — surface comes within 3°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

SatRISK
71°/64°
Dew margin
-0.6°F
Overnight dew
High
Rain
29%
Window
—

High condensation risk overnight — surface dips to within -0.6°F of the 63°F dew point (low 63°F, 100% cloud, 10 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SunRISK
68°/64°
Dew margin
-0.6°F
Overnight dew
High
Rain
18%
Window
—

High condensation risk overnight — surface dips to within -0.6°F of the 61°F dew point (low 60°F, 100% cloud, 11 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

CautionMon — today & tonight
  • Cold mornings (down to 42°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

Caution. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Myrtle Beach

Epoxy & Resin Floors weather elsewhere in South Carolina