paint·day

Is it good to stain in Myrtle Beach, SC this week?

A live 7-day go/no-go calendar for deck & fence stain in Myrtle Beach, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayCautionBest upcoming window: Mon (Caution)
MonCAUTION
58°/42°
Dew margin
9.5°F
Overnight dew
Low
Rain
0%
Window
10am–5pm

Cold mornings (down to 42°F, floor is 50°F) — wait for the surface to warm past midday before you stain.

TueCAUTION
63°/47°
Dew margin
6.9°F
Overnight dew
Low
Rain
0%
Window
9am–5pm

Cold mornings (down to 47°F, floor is 50°F) — wait for the surface to warm past midday before you stain.

WedCAUTION
67°/51°
Dew margin
3.1°F
Overnight dew
Watch
Rain
0%
Window
8am–4pm

Watch overnight dew — surface comes within 3.1°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

ThuRISK
70°/57°
Dew margin
-0.2°F
Overnight dew
High
Rain
9%
Window
—

High condensation risk overnight — surface dips to within -0.2°F of the 55°F dew point (low 55°F, 100% cloud, 9 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

FriRISK
72°/63°
Dew margin
-1.5°F
Overnight dew
High
Rain
21%
Window
—

High condensation risk overnight — surface dips to within -1.5°F of the 60°F dew point (low 59°F, 100% cloud, 11 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

SatRISK
65°/63°
Dew margin
0.5°F
Overnight dew
High
Rain
35%
Window
—

High condensation risk overnight — surface dips to within 0.5°F of the 61°F dew point (low 62°F, 100% cloud, 7 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

SunRISK
64°/62°
Dew margin
1.7°F
Overnight dew
High
Rain
18%
Window
—

High condensation risk overnight — surface dips to within 1.7°F of the 60°F dew point (low 60°F, 98% cloud, 8 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

CautionMon — today & tonight
  • Cold mornings (down to 42°F, floor is 50°F) — wait for the surface to warm past midday before you stain.

Caution. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Stain applied to a damp or dew-wet board can't penetrate — it beads, stays tacky and flakes. Wood must be dry and stay above the dew point while it sets.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–90°F band (low-temp lines to 45°F).
  • • Humidity under 85%; ideally under 70%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Myrtle Beach

Deck & Fence Stain weather elsewhere in South Carolina