paint·day

Is it good to coat in Cheyenne, WY this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Cheyenne, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayCautionBest upcoming window: Mon (Caution)
MonCAUTION
63°/34°
Dew margin
2.8°F
Overnight dew
Watch
Rain
0%
Window
10am–7pm

Watch overnight dew — surface comes within 2.8°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

TueCAUTION
57°/38°
Dew margin
6.7°F
Overnight dew
Low
Rain
1%
Window
10am–5pm

Cold mornings (down to 38°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

WedRISK
45°/35°
Dew margin
16.8°F
Overnight dew
Low
Rain
0%
Window
—

Too cold to coat — daytime high only 45°F, below the 50°F minimum (even a low-temp line needs 50°F+).

ThuRISK
47°/38°
Dew margin
9.8°F
Overnight dew
Low
Rain
1%
Window
—

Too cold to coat — daytime high only 47°F, below the 50°F minimum (even a low-temp line needs 50°F+).

FriRISK
52°/43°
Dew margin
8.5°F
Overnight dew
Low
Rain
14%
Window
—

Rain likely in the 24h cure window (14% chance, ~2.5mm) — it can wash out or mar an uncured coat.

SatRISK
43°/34°
Dew margin
4.5°F
Overnight dew
Watch
Rain
6%
Window
—

Too cold to coat — daytime high only 43°F, below the 50°F minimum (even a low-temp line needs 50°F+).

SunRISK
48°/35°
Dew margin
20.9°F
Overnight dew
Low
Rain
1%
Window
—

Too cold to coat — daytime high only 48°F, below the 50°F minimum (even a low-temp line needs 50°F+).

CautionMon — today & tonight
  • Watch overnight dew — surface comes within 2.8°F of the dew point (margin is 5°F). Time the coat to dry well before evening.
  • Cold mornings (down to 34°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

Caution. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Cheyenne

Epoxy & Resin Floors weather elsewhere in Wyoming