paint·day

Is it good to stain in Tulsa, OK this week?

A live 7-day go/no-go calendar for deck & fence stain in Tulsa, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Tue (Caution)
MonRISK
60°/41°
Dew margin
4.4°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within 4.4°F of the 28°F dew point (low 33°F, 0% cloud, 2 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

TueCAUTION
61°/37°
Dew margin
6.6°F
Overnight dew
Low
Rain
0%
Window
10am–5pm

Cold mornings (down to 37°F, floor is 50°F) — wait for the surface to warm past midday before you stain.

WedRISK
64°/38°
Dew margin
-3.8°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -3.8°F of the 49°F dew point (low 45°F, 0% cloud, 6 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

ThuRISK
70°/53°
Dew margin
-0.7°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -0.7°F of the 50°F dew point (low 49°F, 0% cloud, 7 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

FriCAUTION
70°/55°
Dew margin
3.1°F
Overnight dew
Watch
Rain
11%
Window
9am–7pm

Watch overnight dew — surface comes within 3.1°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

SatRISK
71°/57°
Dew margin
-18.5°F
Overnight dew
High
Rain
18%
Window
—

High condensation risk overnight — surface dips to within -18.5°F of the 56°F dew point (low 35°F, 100% cloud, 7 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

SunRISK
63°/54°
Dew margin
1.5°F
Overnight dew
High
Rain
3%
Window
—

High condensation risk overnight — surface dips to within 1.5°F of the 33°F dew point (low 34°F, 0% cloud, 7 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

Hold offMon — today & tonight
  • High condensation risk overnight — surface dips to within 4.4°F of the 28°F dew point (low 33°F, 0% cloud, 2 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.
  • Cold mornings (down to 41°F, floor is 50°F) — wait for the surface to warm past midday before you stain.
  • High humidity (90%, over the 85% mark) slows drying — keep an eye on the cure window.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Stain applied to a damp or dew-wet board can't penetrate — it beads, stays tacky and flakes. Wood must be dry and stay above the dew point while it sets.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–90°F band (low-temp lines to 45°F).
  • • Humidity under 85%; ideally under 70%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Tulsa

Deck & Fence Stain weather elsewhere in Oklahoma