paint·day

Is it good to coat in Dayton, OH this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Dayton, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Tue (Caution)
MonRISK
51°/37°
Dew margin
1.1°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within 1.1°F of the 30°F dew point (low 30°F, 2% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

TueCAUTION
52°/32°
Dew margin
3.4°F
Overnight dew
Watch
Rain
0%
Window
1pm–3pm

Watch overnight dew — surface comes within 3.4°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

WedRISK
60°/33°
Dew margin
1°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within 1°F of the 33°F dew point (low 33°F, 37% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

ThuRISK
61°/44°
Dew margin
2.3°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within 2.3°F of the 36°F dew point (low 39°F, 0% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

FriCAUTION
64°/47°
Dew margin
2.9°F
Overnight dew
Watch
Rain
1%
Window
10am–5pm

Watch overnight dew — surface comes within 2.9°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

SatRISK
63°/48°
Dew margin
-5.8°F
Overnight dew
High
Rain
21%
Window
—

High condensation risk overnight — surface dips to within -5.8°F of the 50°F dew point (low 43°F, 100% cloud, 7 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SunRISK
57°/56°
Dew margin
-14.5°F
Overnight dew
High
Rain
27%
Window
—

High condensation risk overnight — surface dips to within -14.5°F of the 56°F dew point (low 38°F, 100% cloud, 4 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

Hold offMon — today & tonight
  • High condensation risk overnight — surface dips to within 1.1°F of the 30°F dew point (low 30°F, 2% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
  • Cold mornings (down to 37°F, floor is 50°F) — wait for the surface to warm past midday before you coat.
  • High humidity (94%, over the 85% mark) slows drying — keep an eye on the cure window.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Dayton

Epoxy & Resin Floors weather elsewhere in Ohio