paint·day

Is it good to coat in Lubbock, TX this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Lubbock, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Sat (Caution)
MonRISK
46°/42°
Dew margin
0.5°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within 0.5°F of the 43°F dew point (low 44°F, 100% cloud, 7 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

TueRISK
49°/45°
Dew margin
0.7°F
Overnight dew
High
Rain
2%
Window
—

High condensation risk overnight — surface dips to within 0.7°F of the 41°F dew point (low 42°F, 85% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedRISK
58°/42°
Dew margin
-4.2°F
Overnight dew
High
Rain
1%
Window
—

High condensation risk overnight — surface dips to within -4.2°F of the 48°F dew point (low 44°F, 0% cloud, 8 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

ThuRISK
66°/50°
Dew margin
-1.3°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -1.3°F of the 51°F dew point (low 50°F, 0% cloud, 12 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

FriRISK
66°/55°
Dew margin
-0.8°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -0.8°F of the 52°F dew point (low 51°F, 100% cloud, 8 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatCAUTION
70°/54°
Dew margin
3.8°F
Overnight dew
Watch
Rain
1%
Window
10am–7pm

Watch overnight dew — surface comes within 3.8°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

SunCAUTION
61°/48°
Dew margin
5°F
Overnight dew
Low
Rain
2%
Window
10am–5pm

Cold mornings (down to 48°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

Hold offMon — today & tonight
  • High condensation risk overnight — surface dips to within 0.5°F of the 43°F dew point (low 44°F, 100% cloud, 7 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
  • Too cold to coat — daytime high only 46°F, below the 50°F minimum (even a low-temp line needs 50°F+).
  • Humidity peaks at 96% — well above the 85% ceiling; cure stalls and moisture gets trapped.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Lubbock

Epoxy & Resin Floors weather elsewhere in Texas