paint·day

Is it good to paint in South Bend, IN this week?

A live 7-day go/no-go calendar for exterior paint in South Bend, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Wed (Caution)
SunRISK
49°/35°
Dew margin
0.3°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within 0.3°F of the 29°F dew point (low 29°F, 100% cloud, 1 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.

MonRISK
51°/30°
Dew margin
3.2°F
Overnight dew
Watch
Rain
0%
Window
—

Humidity peaks at 98% — well above the 85% ceiling; cure stalls and moisture gets trapped.

TueRISK
53°/32°
Dew margin
1.5°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within 1.5°F of the 33°F dew point (low 35°F, 35% cloud, 8 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.

WedCAUTION
58°/40°
Dew margin
10.3°F
Overnight dew
Low
Rain
0%
Window
11am–5pm

Cold mornings (down to 40°F, floor is 50°F) — wait for the surface to warm past midday before you paint.

ThuRISK
62°/46°
Dew margin
4°F
Overnight dew
High
Rain
2%
Window
—

High condensation risk overnight — surface dips to within 4°F of the 43°F dew point (low 47°F, 0% cloud, 6 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.

FriCAUTION
58°/47°
Dew margin
7.5°F
Overnight dew
Low
Rain
5%
Window
10am–5pm

Cold mornings (down to 47°F, floor is 50°F) — wait for the surface to warm past midday before you paint.

SatCAUTION
61°/46°
Dew margin
14.2°F
Overnight dew
Low
Rain
32%
Window
10am–5pm

Cold mornings (down to 46°F, floor is 50°F) — wait for the surface to warm past midday before you paint.

Hold offSun — today & tonight
  • High condensation risk overnight — surface dips to within 0.3°F of the 29°F dew point (low 29°F, 100% cloud, 1 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.
  • Too cold to paint — daytime high only 49°F, below the 50°F minimum (even a low-temp line needs 35°F+).
  • High humidity (93%, over the 85% mark) slows drying — keep an eye on the cure window.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Overnight dew condensing on a fresh coat causes blistering, surfactant leaching and peeling — the cause of 40%+ of exterior paint failures.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–85°F band (low-temp lines to 35°F).
  • • Humidity under 85%; ideally under 70%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in South Bend

Exterior Paint weather elsewhere in Indiana