Is it good to paint in Bellevue, WA this week?
A live 7-day go/no-go calendar for exterior paint in Bellevue, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.
- Dew margin
- 4.8°F
- Overnight dew
- Watch
- Rain
- 5%
- Window
- 9am–5pm
Watch overnight dew — surface comes within 4.8°F of the dew point (margin is 5°F). Time the coat to dry well before evening.
- Dew margin
- 6.7°F
- Overnight dew
- Low
- Rain
- 6%
- Window
- 8am–5pm
Clear to paint: temps 56–71°F, RH under 82%, surface stays 6.7°F+ above the dew point, no rain in the cure window.
- Dew margin
- 7.7°F
- Overnight dew
- Low
- Rain
- 2%
- Window
- 8am–5pm
Clear to paint: temps 56–69°F, RH under 77%, surface stays 7.7°F+ above the dew point, no rain in the cure window.
- Dew margin
- 4.6°F
- Overnight dew
- Watch
- Rain
- 6%
- Window
- 8am–5pm
Watch overnight dew — surface comes within 4.6°F of the dew point (margin is 5°F). Time the coat to dry well before evening.
- Dew margin
- 4.4°F
- Overnight dew
- Watch
- Rain
- 17%
- Window
- 8am–5pm
Watch overnight dew — surface comes within 4.4°F of the dew point (margin is 5°F). Time the coat to dry well before evening.
- Dew margin
- 3.1°F
- Overnight dew
- High
- Rain
- 9%
- Window
- —
High condensation risk overnight — surface dips to within 3.1°F of the 50°F dew point (low 53°F, 34% cloud, 2 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.
- Dew margin
- 12.2°F
- Overnight dew
- Low
- Rain
- 5%
- Window
- 8am–5pm
Clear to paint: temps 62–82°F, RH under 66%, surface stays 12.2°F+ above the dew point, no rain in the cure window.
- Watch overnight dew — surface comes within 4.8°F of the dew point (margin is 5°F). Time the coat to dry well before evening.
Caution. These are forecast numbers — confirm the surface temperature on-site before you start.
Why these thresholds
Overnight dew condensing on a fresh coat causes blistering, surfactant leaching and peeling — the cause of 40%+ of exterior paint failures.
- • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
- • Air + surface in the 50–85°F band (low-temp lines to 35°F).
- • Humidity under 85%; ideally under 70%.
- • No rain for 24h after application.
- • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.
Free in the beta
Watch this job site 24/7
Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.