Is it good to paint in Spokane, WA this week?
A live 7-day go/no-go calendar for exterior paint in Spokane, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.
- Dew margin
- 12.8°F
- Overnight dew
- Low
- Rain
- 0%
- Window
- 10am–5pm
Cold mornings (down to 41°F, floor is 50°F) — wait for the surface to warm past midday before you paint.
- Dew margin
- 19°F
- Overnight dew
- Low
- Rain
- 5%
- Window
- 10am–5pm
Cold mornings (down to 42°F, floor is 50°F) — wait for the surface to warm past midday before you paint.
- Dew margin
- 6.6°F
- Overnight dew
- Low
- Rain
- 2%
- Window
- 9am–5pm
Cold mornings (down to 50°F, floor is 50°F) — wait for the surface to warm past midday before you paint.
- Dew margin
- 17.2°F
- Overnight dew
- Low
- Rain
- 2%
- Window
- 8am–5pm
Clear to paint: temps 52–68°F, RH under 75%, surface stays 17.2°F+ above the dew point, no rain in the cure window.
- Dew margin
- 13.4°F
- Overnight dew
- Low
- Rain
- 3%
- Window
- 8am–5pm
Clear to paint: temps 53–68°F, RH under 35%, surface stays 13.4°F+ above the dew point, no rain in the cure window.
- Dew margin
- 12.1°F
- Overnight dew
- Low
- Rain
- 3%
- Window
- 8am–5pm
Clear to paint: temps 54–74°F, RH under 41%, surface stays 12.1°F+ above the dew point, no rain in the cure window.
- Dew margin
- 9.7°F
- Overnight dew
- Low
- Rain
- 0%
- Window
- 8am–5pm
Clear to paint: temps 56–74°F, RH under 44%, surface stays 9.7°F+ above the dew point, no rain in the cure window.
- Cold mornings (down to 41°F, floor is 50°F) — wait for the surface to warm past midday before you paint.
- High humidity (93%, over the 85% mark) slows drying — keep an eye on the cure window.
Caution. These are forecast numbers — confirm the surface temperature on-site before you start.
Why these thresholds
Overnight dew condensing on a fresh coat causes blistering, surfactant leaching and peeling — the cause of 40%+ of exterior paint failures.
- • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
- • Air + surface in the 50–85°F band (low-temp lines to 35°F).
- • Humidity under 85%; ideally under 70%.
- • No rain for 24h after application.
- • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.
Free in the beta
Watch this job site 24/7
Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.