paint·day

Is it good to coat in Spokane, WA this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Spokane, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold off
SunRISK
51°/43°
Dew margin
1.3°F
Overnight dew
High
Rain
66%
Window
—

High condensation risk overnight — surface dips to within 1.3°F of the 39°F dew point (low 39°F, 100% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

MonRISK
47°/40°
Dew margin
1.5°F
Overnight dew
High
Rain
2%
Window
—

High condensation risk overnight — surface dips to within 1.5°F of the 32°F dew point (low 33°F, 100% cloud, 3 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

TueRISK
46°/34°
Dew margin
4.6°F
Overnight dew
High
Rain
1%
Window
—

High condensation risk overnight — surface dips to within 4.6°F of the 29°F dew point (low 33°F, 7% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

WedRISK
46°/36°
Dew margin
7.9°F
Overnight dew
Low
Rain
27%
Window
—

Too cold to coat — daytime high only 46°F, below the 50°F minimum (even a low-temp line needs 50°F+).

ThuRISK
46°/39°
Dew margin
6.1°F
Overnight dew
Low
Rain
13%
Window
—

Too cold to coat — daytime high only 46°F, below the 50°F minimum (even a low-temp line needs 50°F+).

FriRISK
43°/34°
Dew margin
3.7°F
Overnight dew
Watch
Rain
9%
Window
—

Too cold to coat — daytime high only 43°F, below the 50°F minimum (even a low-temp line needs 50°F+).

SatRISK
44°/37°
Dew margin
-2.6°F
Overnight dew
High
Rain
24%
Window
—

High condensation risk overnight — surface dips to within -2.6°F of the 36°F dew point (low 33°F, 100% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

Hold offSun — today & tonight
  • High condensation risk overnight — surface dips to within 1.3°F of the 39°F dew point (low 39°F, 100% cloud, 2 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
  • Rain likely in the 24h cure window (66% chance) — it can wash out or mar an uncured coat.
  • Cold mornings (down to 43°F, floor is 50°F) — wait for the surface to warm past midday before you coat.
  • High humidity (92%, over the 85% mark) slows drying — keep an eye on the cure window.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Spokane

Epoxy & Resin Floors weather elsewhere in Washington