Is it good to stain in Denver, CO this week?
A live 7-day go/no-go calendar for deck & fence stain in Denver, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.
- Dew margin
- 16.4°F
- Overnight dew
- Low
- Rain
- 13%
- Window
- —
Too hot — high of 96°F is well over the 90°F ceiling; the film skins over before it can level or adhere.
- Dew margin
- 0.6°F
- Overnight dew
- High
- Rain
- 29%
- Window
- —
High condensation risk overnight — surface dips to within 0.6°F of the 61°F dew point (low 60°F, 100% cloud, 2 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.
- Dew margin
- 3.2°F
- Overnight dew
- Watch
- Rain
- 89%
- Window
- —
Rain likely in the 24h cure window (89% chance, ~34.4mm) — it can wash out or mar an uncured stain.
- Dew margin
- 7.7°F
- Overnight dew
- Low
- Rain
- 90%
- Window
- —
Rain likely in the 24h cure window (90% chance, ~7.3mm) — it can wash out or mar an uncured stain.
- Dew margin
- 11.1°F
- Overnight dew
- Low
- Rain
- 65%
- Window
- —
Rain likely in the 24h cure window (65% chance) — it can wash out or mar an uncured stain.
- Dew margin
- 2.4°F
- Overnight dew
- Watch
- Rain
- 61%
- Window
- —
Rain likely in the 24h cure window (61% chance, ~2.1mm) — it can wash out or mar an uncured stain.
- Dew margin
- 10.6°F
- Overnight dew
- Low
- Rain
- 34%
- Window
- —
Rain likely in the 24h cure window (34% chance, ~10.7mm) — it can wash out or mar an uncured stain.
- Too hot — high of 96°F is well over the 90°F ceiling; the film skins over before it can level or adhere.
Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.
Why these thresholds
Stain applied to a damp or dew-wet board can't penetrate — it beads, stays tacky and flakes. Wood must be dry and stay above the dew point while it sets.
- • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
- • Air + surface in the 50–90°F band (low-temp lines to 45°F).
- • Humidity under 85%; ideally under 70%.
- • No rain for 24h after application.
- • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.
Free in the beta
Watch this job site 24/7
Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.