paint·day

Is it good to coat in Denver, CO this week?

A live 7-day go/no-go calendar for epoxy & resin floors in Denver, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Tue (Caution)
MonRISK
65°/35°
Dew margin
2.2°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within 2.2°F of the 24°F dew point (low 26°F, 39% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

TueCAUTION
69°/36°
Dew margin
9.7°F
Overnight dew
Low
Rain
0%
Window
10am–5pm

Cold mornings (down to 36°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

WedCAUTION
59°/42°
Dew margin
18.4°F
Overnight dew
Low
Rain
0%
Window
11am–5pm

Cold mornings (down to 42°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

ThuCAUTION
54°/43°
Dew margin
19.5°F
Overnight dew
Low
Rain
0%
Window
12pm–5pm

Cold mornings (down to 43°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

FriRISK
59°/45°
Dew margin
-1.1°F
Overnight dew
High
Rain
10%
Window
—

High condensation risk overnight — surface dips to within -1.1°F of the 33°F dew point (low 26°F, 100% cloud, 10 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.

SatCAUTION
51°/40°
Dew margin
10.6°F
Overnight dew
Low
Rain
10%
Window
2pm–5pm

Cold mornings (down to 40°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

SunCAUTION
52°/38°
Dew margin
13.6°F
Overnight dew
Low
Rain
0%
Window
1pm–5pm

Cold mornings (down to 38°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

Hold offMon — today & tonight
  • High condensation risk overnight — surface dips to within 2.2°F of the 24°F dew point (low 26°F, 39% cloud, 5 mph wind). A fresh coat can blush/blister. Stop 4h before dew falls.
  • Cold mornings (down to 35°F, floor is 50°F) — wait for the surface to warm past midday before you coat.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Installing within 5°F of the dew point causes amine blush / carbamation — a cloudy, greasy, hazed floor. The slab surface temp, not the air, is what counts.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–86°F band (low-temp lines to 50°F).
  • • Humidity under 85%; ideally under 80%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Denver

Epoxy & Resin Floors weather elsewhere in Colorado