paint·day

Is it good to stain in Salt Lake City, UT this week?

A live 7-day go/no-go calendar for deck & fence stain in Salt Lake City, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayCautionBest upcoming window: Mon (Caution)
MonCAUTION
61°/43°
Dew margin
11°F
Overnight dew
Low
Rain
4%
Window
11am–5pm

Cold mornings (down to 43°F, floor is 50°F) — wait for the surface to warm past midday before you stain.

TueRISK
50°/42°
Dew margin
0.2°F
Overnight dew
High
Rain
100%
Window
—

High condensation risk overnight — surface dips to within 0.2°F of the 32°F dew point (low 32°F, 100% cloud, 5 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

WedRISK
45°/33°
Dew margin
8.6°F
Overnight dew
Low
Rain
63%
Window
—

Too cold to stain — daytime high only 45°F, below the 50°F minimum (even a low-temp line needs 45°F+).

ThuRISK
45°/41°
Dew margin
-3.2°F
Overnight dew
High
Rain
89%
Window
—

High condensation risk overnight — surface dips to within -3.2°F of the 36°F dew point (low 33°F, 100% cloud, 9 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

FriRISK
46°/38°
Dew margin
0.4°F
Overnight dew
High
Rain
94%
Window
—

High condensation risk overnight — surface dips to within 0.4°F of the 27°F dew point (low 27°F, 8% cloud, 3 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

SatRISK
45°/37°
Dew margin
15.6°F
Overnight dew
Low
Rain
20%
Window
—

Too cold to stain — daytime high only 45°F, below the 50°F minimum (even a low-temp line needs 45°F+).

SunRISK
47°/40°
Dew margin
12.7°F
Overnight dew
Low
Rain
20%
Window
—

Too cold to stain — daytime high only 47°F, below the 50°F minimum (even a low-temp line needs 45°F+).

CautionMon — today & tonight
  • Cold mornings (down to 43°F, floor is 50°F) — wait for the surface to warm past midday before you stain.

Caution. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Stain applied to a damp or dew-wet board can't penetrate — it beads, stays tacky and flakes. Wood must be dry and stay above the dew point while it sets.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–90°F band (low-temp lines to 45°F).
  • • Humidity under 85%; ideally under 70%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Salt Lake City

Deck & Fence Stain weather elsewhere in Utah