paint·day

Is it good to stain in Chandler, AZ this week?

A live 7-day go/no-go calendar for deck & fence stain in Chandler, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayCautionBest upcoming window: Thu (Good to go)
MonCAUTION
79°/56°
Dew margin
4.7°F
Overnight dew
Watch
Rain
36%
Window
8am–5pm

Watch overnight dew — surface comes within 4.7°F of the dew point (margin is 5°F). Time the coat to dry well before evening.

TueRISK
67°/61°
Dew margin
1.3°F
Overnight dew
High
Rain
43%
Window
—

High condensation risk overnight — surface dips to within 1.3°F of the 46°F dew point (low 45°F, 67% cloud, 3 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

WedCAUTION
70°/47°
Dew margin
9.8°F
Overnight dew
Low
Rain
0%
Window
9am–5pm

Cold mornings (down to 47°F, floor is 50°F) — wait for the surface to warm past midday before you stain.

ThuGO
74°/63°
Dew margin
13.1°F
Overnight dew
Low
Rain
6%
Window
8am–5pm

Clear to stain: temps 63–74°F, RH under 40%, surface stays 13.1°F+ above the dew point, no rain in the cure window.

FriGO
70°/62°
Dew margin
5.9°F
Overnight dew
Low
Rain
6%
Window
8am–5pm

Clear to stain: temps 62–70°F, RH under 37%, surface stays 5.9°F+ above the dew point, no rain in the cure window.

SatGO
69°/62°
Dew margin
5.3°F
Overnight dew
Low
Rain
0%
Window
8am–5pm

Clear to stain: temps 62–69°F, RH under 46%, surface stays 5.3°F+ above the dew point, no rain in the cure window.

SunGO
72°/63°
Dew margin
7.6°F
Overnight dew
Low
Rain
1%
Window
8am–5pm

Clear to stain: temps 63–72°F, RH under 43%, surface stays 7.6°F+ above the dew point, no rain in the cure window.

CautionMon — today & tonight
  • Watch overnight dew — surface comes within 4.7°F of the dew point (margin is 5°F). Time the coat to dry well before evening.
  • Some rain risk (36%) during the cure window — re-check the radar before you start.

Caution. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Stain applied to a damp or dew-wet board can't penetrate — it beads, stays tacky and flakes. Wood must be dry and stay above the dew point while it sets.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–90°F band (low-temp lines to 45°F).
  • • Humidity under 85%; ideally under 70%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Chandler

Deck & Fence Stain weather elsewhere in Arizona