paint·day

Is it good to stain in Tucson, AZ this week?

A live 7-day go/no-go calendar for deck & fence stain in Tucson, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayGood to goBest upcoming window: Mon (Good to go)
MonGO
79°/58°
Dew margin
6.6°F
Overnight dew
Low
Rain
2%
Window
8am–5pm

Clear to stain: temps 58–79°F, RH under 65%, surface stays 6.6°F+ above the dew point, no rain in the cure window.

TueRISK
69°/56°
Dew margin
3°F
Overnight dew
High
Rain
15%
Window
—

High condensation risk overnight — surface dips to within 3°F of the 42°F dew point (low 43°F, 7% cloud, 4 mph wind). A fresh stain can blush/blister. Stop 4h before dew falls.

WedCAUTION
70°/47°
Dew margin
6.5°F
Overnight dew
Low
Rain
0%
Window
9am–5pm

Cold mornings (down to 47°F, floor is 50°F) — wait for the surface to warm past midday before you stain.

ThuGO
76°/62°
Dew margin
6.7°F
Overnight dew
Low
Rain
3%
Window
8am–5pm

Clear to stain: temps 62–76°F, RH under 37%, surface stays 6.7°F+ above the dew point, no rain in the cure window.

FriGO
70°/61°
Dew margin
6.9°F
Overnight dew
Low
Rain
3%
Window
8am–5pm

Clear to stain: temps 61–70°F, RH under 39%, surface stays 6.9°F+ above the dew point, no rain in the cure window.

SatGO
67°/59°
Dew margin
7.1°F
Overnight dew
Low
Rain
1%
Window
8am–5pm

Clear to stain: temps 59–67°F, RH under 39%, surface stays 7.1°F+ above the dew point, no rain in the cure window.

SunGO
71°/61°
Dew margin
8.6°F
Overnight dew
Low
Rain
1%
Window
8am–5pm

Clear to stain: temps 61–71°F, RH under 40%, surface stays 8.6°F+ above the dew point, no rain in the cure window.

Good to goMon — today & tonight
  • Clear to stain: temps 58–79°F, RH under 65%, surface stays 6.6°F+ above the dew point, no rain in the cure window.

Good to go. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Stain applied to a damp or dew-wet board can't penetrate — it beads, stays tacky and flakes. Wood must be dry and stay above the dew point while it sets.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–90°F band (low-temp lines to 45°F).
  • • Humidity under 85%; ideally under 70%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Tucson

Deck & Fence Stain weather elsewhere in Arizona