paint·day

Is it good to paint in Fort Worth, TX this week?

A live 7-day go/no-go calendar for exterior paint in Fort Worth, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.

TodayHold offBest upcoming window: Fri (Good to go)
TueRISK
64°/41°
Dew margin
0.9°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within 0.9°F of the 36°F dew point (low 37°F, 100% cloud, 1 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.

WedRISK
68°/43°
Dew margin
-5.5°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -5.5°F of the 50°F dew point (low 45°F, 100% cloud, 3 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.

ThuRISK
70°/58°
Dew margin
-1.2°F
Overnight dew
High
Rain
0%
Window
—

High condensation risk overnight — surface dips to within -1.2°F of the 53°F dew point (low 50°F, 16% cloud, 4 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.

FriGO
73°/58°
Dew margin
6.2°F
Overnight dew
Low
Rain
2%
Window
8am–5pm

Clear to paint: temps 58–73°F, RH under 80%, surface stays 6.2°F+ above the dew point, no rain in the cure window.

SatRISK
75°/60°
Dew margin
-7.7°F
Overnight dew
High
Rain
14%
Window
—

High condensation risk overnight — surface dips to within -7.7°F of the 55°F dew point (low 46°F, 6% cloud, 7 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.

SunGO
72°/63°
Dew margin
6°F
Overnight dew
Low
Rain
7%
Window
9am–5pm

Clear to paint: temps 63–72°F, RH under 56%, surface stays 6°F+ above the dew point, no rain in the cure window.

MonRISK
68°/61°
Dew margin
-3.3°F
Overnight dew
High
Rain
13%
Window
—

High condensation risk overnight — surface dips to within -3.3°F of the 60°F dew point (low 56°F, 100% cloud, 13 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.

Hold offTue — today & tonight
  • High condensation risk overnight — surface dips to within 0.9°F of the 36°F dew point (low 37°F, 100% cloud, 1 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.
  • Cold mornings (down to 41°F, floor is 50°F) — wait for the surface to warm past midday before you paint.
  • High humidity (94%, over the 85% mark) slows drying — keep an eye on the cure window.

Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.

Why these thresholds

Overnight dew condensing on a fresh coat causes blistering, surfactant leaching and peeling — the cause of 40%+ of exterior paint failures.

  • • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
  • • Air + surface in the 50–85°F band (low-temp lines to 35°F).
  • • Humidity under 85%; ideally under 70%.
  • • No rain for 24h after application.
  • • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.

Free in the beta

Watch this job site 24/7

Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.

Set up a free alert→

Other coatings in Fort Worth

Exterior Paint weather elsewhere in Texas