Is it good to paint in Arlington, TX this week?
A live 7-day go/no-go calendar for exterior paint in Arlington, built from the local forecast against the 5°F-above-dew-point rule. We lead with the signal a weather app misses: overnight condensation risk.
- Dew margin
- -0.2°F
- Overnight dew
- High
- Rain
- 0%
- Window
- —
High condensation risk overnight — surface dips to within -0.2°F of the 37°F dew point (low 37°F, 100% cloud, 3 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.
- Dew margin
- -6.5°F
- Overnight dew
- High
- Rain
- 0%
- Window
- —
High condensation risk overnight — surface dips to within -6.5°F of the 51°F dew point (low 45°F, 100% cloud, 3 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.
- Dew margin
- -1°F
- Overnight dew
- High
- Rain
- 0%
- Window
- —
High condensation risk overnight — surface dips to within -1°F of the 53°F dew point (low 50°F, 16% cloud, 4 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.
- Dew margin
- 6.2°F
- Overnight dew
- Low
- Rain
- 2%
- Window
- 8am–5pm
Clear to paint: temps 59–73°F, RH under 80%, surface stays 6.2°F+ above the dew point, no rain in the cure window.
- Dew margin
- -6.8°F
- Overnight dew
- High
- Rain
- 15%
- Window
- —
High condensation risk overnight — surface dips to within -6.8°F of the 54°F dew point (low 47°F, 7% cloud, 8 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.
- Dew margin
- 6°F
- Overnight dew
- Low
- Rain
- 8%
- Window
- 9am–5pm
Clear to paint: temps 63–72°F, RH under 56%, surface stays 6°F+ above the dew point, no rain in the cure window.
- Dew margin
- -5.4°F
- Overnight dew
- High
- Rain
- 13%
- Window
- —
High condensation risk overnight — surface dips to within -5.4°F of the 60°F dew point (low 55°F, 100% cloud, 10 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.
- High condensation risk overnight — surface dips to within -0.2°F of the 37°F dew point (low 37°F, 100% cloud, 3 mph wind). A fresh paint can blush/blister. Stop 4h before dew falls.
- Cold mornings (down to 43°F, floor is 50°F) — wait for the surface to warm past midday before you paint.
Hold off. These are forecast numbers — confirm the surface temperature on-site before you start.
Why these thresholds
Overnight dew condensing on a fresh coat causes blistering, surfactant leaching and peeling — the cause of 40%+ of exterior paint failures.
- • Surface temp must stay 5°F above the dew point through application and cure (ASTM D3276 / ISO 8502-42).
- • Air + surface in the 50–85°F band (low-temp lines to 35°F).
- • Humidity under 85%; ideally under 70%.
- • No rain for 24h after application.
- • We use the forecast ground-surface temperature as a surface-temp proxy — confirm on-site with an IR thermometer.
Free in the beta
Watch this job site 24/7
Get an email the moment overnight dew, rain, or an out-of-range stretch threatens a fresh coat — and a morning digest with the best window ahead. No app to check; we watch the forecast for you.